Chapter 528 2023 Meeting

 So I definitely wish my EAA chapter was more active like I hear other ones are.  My chapter hasn't met for quite some time.  It's really disappointing to me as I want to get to know these guys and hopefully have them come assist or give me tips on my build.  Many of the people who come to the meetings I am finding are not actually builders, but many have bought completed RV's or other homebuilts.  You hear lots of chatter about people needing an A and P or looking for someone to look over the plane.  There is one person who is kind of the tech counselor, he is actually the RV-10 owner thats local, so that is a great benefit as a resource.  The other person who runs the chapter built and RV-7 and had built another early generation RV years ago.  So I am hoping to get these two to be more involved and lend a hand at times.

So we met up at the hangars out at FOK last month and got to chat and relax awhile.  A builder who is just about done with his Sonex showed off his build.  His build just did Taxi testing and is doing some final cowl work now.  He is excited to get that process going.

Another person I met was someone building an RV-12 based out at Mattituck.  He's a retired career helicopter pilot between the military and police department who is now enjoying the extra free time he has.  He's been making good progress on his kit and has a lot of the parts on hand so he isn't being delayed by much.  I am eager to see how his build progresses and hope we end up visiting him later this summer and seeing his project.

NY, especially downstate, has a serious problem with hangar availability and the cost of that.  Between the efforts to close the East Hampton airport, and the serious influx of traffic, the hangars are hard to find.  The guy building the Sonex was on the waitlist for 5 years before he finally got offered one.  I guess I need to get on the list, but I don't want to get a call and be unprepared.  

We all had a nice afternoon and had some pizza over our plane chatter. I am hoping that COVID is now over, we will meet a little more often and the guys who are actively or have previously built will get a bit more hands on with helping or pointing me in the right direction.  I really want some extra eyes to give me tips, feedback, and insure I am moving in the right direction before I get into the really big and expensive pieces.

Tail Kit Has Begun!

Inventory of Tail Kit 

Well I have successfully completed the inventory of the tail kit.  I luckily had no backordered parts so I can get going without any hiccups.  After about 5 hours of tedious counting and sorting, the small hardware is sorted and boxed away.  The skins and larger pieces are in the middle of the garage, I need to sort through them a bit more when I get a free minute.  I would like to condense the wing and tail kit boxes together if I can to free up more floor space.  I will probably do that after I get back from my visit to Osh Kosh for Airventure 2022!

Chapter 6: The Vertical Stabilizer Begins...

Now that inventory is completed, I pulled out the beginning parts and got started on section 6, the Vertical Stabilizer.  The beginning has you do some cutting on the spar caps and lots of match drilling.  I know the kit is mostly final size drilled, but some things like these spar caps have no holes when they arrive.  So I busted out the old air drill and went to town, I noticed it makes my compressor run non stop, so I am debating trying out my cordless drill for the next part and compare.  I know many have debated the ease of use vs the heavier tool, but I want to try it myself.  The other thing I noticed is my band saw it a little on the "touchy" side.  Any little movement and I honestly think it has some wiggle into the band itself.  I was trying to be as straight and precise, but it was not the prettiest thing I have done.  Cutting a 16" straight line on such a narrow piece is not very easy to do.  It has plenty of edge distance and I got lots of deburring practice and cleaned it up a bit.  

Spar Caps Cut and Cleco'd

Spar Caps Cleco'd To the VS Spar

After that I dove into and started drilling the Spar Caps to the Spar web.  This wasn't terrible but it is lots of drill, cleco, uncleco, deburr, cleco and repeat.  I can see why many of the older builders mentioned the final size holes being a godsend for us newer builds.  I can see how this extra step on a lot of parts to upsize everything can be a pain.  I found the time outside so far relaxing and enjoyable.  I hope to get the flange side done this week before leaving for Osh Kosh, my hope is to get the ribs together and maybe have a skin cleco'd before I leave.  

Airventure 2022 is Finally Here!

So Airventure is finally here.  I have been waiting for a full year since my best friend and I decided we were going to go.  It's been bittersweet to plan and think about everything.  Getting to meet some of the builders I follow online, seeing some of their completed projects, and also seeing lots of products on the market in person is going to be amazing.  One of the big reasons I got into the Van's project was everyone always spoke of the Van's Community as being the best of them out there.  The builders I have interacted with and followed all talk about that and it seems many of them build a lot of those bonds at Airventure.  I hope to meet many builders at the RV Social or Van's banquet.  I also am hoping to get some time to walk through the Homebuild camping/parking and see some finished RV-10's.  I'd love to meet some of the builders as well and pick their brain about things they opted to do or not do on their project.  One of the hardest things is making these decisions, but luckily I have some time for the big ticket items.

My buddy and I will be flying out on Monday and staying in Appleton for the 4 days we are staying.  Unfortunately we both have younger kids, and I don't think either of us could afford a divorce over this trip.  We are both blessed to have such amazing and understanding wives to let us embark on this adventure.  It might not be the big adventure of flying there ourselves, but that will come in time.  We are both in our 30's and we hopefully will have many more years to try and attend in a plane ourselves.

As I mentioned, I hope to see some items like lighting and rudder trim.  I know some builders use the aerosport product, some have a servo based system, and others just put a wedge on.  But I think taking a look at the various builds and picking the brains would be beneficial.  I am hoping to get to a few seminars and also take a trip out to checkout Fisk and maybe the tower, I am a controller after all and seeing that operation would be awesome.  So until I get back to Airventure, thanks for reading and Rock you wings.  Welcome to Airventure 2022!

Got reposted by EAA for my Airventure post! 

Workbenches Are 95% Done!

 So the last few nights I’ve been out in the garage working into the wee hours of night.  It’s great because the kids and wife are sleeping and I can work uninterrupted. It took about three sessions of working but I’m 95% done with the EAA tables.  I need to finish up the trip on one table, get wheels from Harbor Freight, and sand them a bit to clean them up.  I am quite pleased with the outcome and getting excited.  I got an email also that my Cleaveland tool kit will be here tomorrow!  Looking forward to the first “shipment” concerning my RV-10 Build.  Time to fill up the toolboxes now.  

Workbench or Bust.....

 So things from summer have finally settled down now that school is back in session.  With my son being at school all day I find a little more time to get things done around the house.  My three year old is quite a good helper as she just loves to help Daddy.  We finally found a nice day out and we cleaned out the garage.  A little bit or organization and some serious vacuuming was done over the afternoon and the garage was looking amazing.  

Last week we took a "Daddy and Maddy" outing to Lowes.  She was super excited to go shopping with Daddy and didn't care it was for me.  We made our way around the lumber and hardware sections to locate everything we needed to build the EAA workbenches.  We used the shopping list off of the online planes from EAA 1000's website.

After purchasing the wood and supplies I finally got some free time and began to construct the table.  I broke out my chalk line and marked off the plywood and got to cutting.  One recommendation to others, have Lowes or Home Depot rip the plywood in half for you. It is very difficult to cut across a 4 o 8 foot section of plywood without a little bit of drift.

After getting all of the plywood pieces cut down, it was time to break out the mitre saw and start cutting the 2x4" pieces to the appropriate lengths.  It was not too bad and I decided to cut sections in an order which I needed them.  It made it simpler to manage as I could assemble sections as I went.  After the kids were in bed, I finally got to assemble the first tabletop and see some results.  

Now that I have the first top done, I plan to finish up the second one and construct the rest of the table tonight.  In other news, I've also placed my order from Cleaveland Tool for my RV-10 kit.  I have to give them credit as the Rivet Gun was out of stock so I signed up for notifications for when it came back in stock.  The next day, I received an email saying it was back in stock.  I emailed Cleaveland and Annette almost instantly responded and said she could add it to the order and sent me the revised invoice.  I have been super happy with her answering my silly questions and promptly helping with the updated order.  I look forward to any future dealings with them based off the interactions so far.  They really seem to be a stellar company to deal with.

Airventure 2021

 Well after a year off, Airventure has returned for 2021.  I unfortunately cannot attend with my work schedule this year, but I am definitely going next year.  My best friend and I have agreed that we will head out commercially and stay 3 days to explore.  I already am mentally building my list of the have to sees in the exhibition area.  I definitely want to stroll around the homebuilt areas and get to meet and pick the brains of the builders.  It would be really great to meet and talk with a few of the builders I followed that had inspired this project.  

I'll be honest, I've had Live ATC going the last three days monitoring the Fisk arrival and watching it on Foreflight's internet traffic.  I am disappointed I couldn't go, but glad that I have a plan for next year.  Any tips for finding a reasonable hotel would be appreciated, it appears most hotels only book a year out, so next summer hasn't quite opened yet.  

I also am looking to possibly find an RV-10 demo flight.  Van's has restarted their demo flights and I think its wise to reach out to Zach, the east coast rep, to try and setup something.  I can use it as another excuse for a cross country and it will help me wrap up this instrument rating as well.

Update on my Project Prep

I have been working on reorganizing the garage and getting ready for this.  I finally got the overhead storage and all of the shelving put up so I can get the floor cleared out.  This also made room for me to buy a brand new tool chest from Harbor Freight.  The US General tool bench is great and I bought an add on end cabinet to increase my storage.  As I get more of the garage cleaned out, I plan to get started on building the project table and the air piping.  I am hoping the lumber cost drops a bit before I start that build, but sometimes you need to just bite the bullet.  Until my next update... I'll try to remember and snap some pictures of the new shelving and workbenches.